Are All Bike Pedal Threads The Same Size?

No, not all bike pedal threads are the same size.

Yes! All bike pedal threads are the same size, so you can interchange them without having to worry about compatibility issues.

Are All Bike Pedal Threads The Same Size?

No, all bike pedal threads are not the same size.

If you’re a cyclist, sooner or later you’re going to need to know how to change a bike pedal. But before you can do that, you need to know what size pedal thread you have. In this article, we’ll tell you everything you need to know about bike pedal threads, including how to measure them.

Bike pedal threads come in two sizes: 9/16” and 1/2”. The vast majority of pedals use the 9/16” size, but some older pedals or pedals designed for smaller riders may use the 1/2” size.

The easiest way to figure out which size you need is to look at the pedals that are already on your bike. If they’re 9/16” pedals, you’ll need 9/16” replacement pedals.

If you don’t have the pedals that came with the bike, or you’re not sure which size they are, you can measure the pedal threads with a simple tool like a caliper or a ruler.

Just measure the diameter of the threads and compare it to the chart below:

9/16” pedal threads have a diameter of 14.2mm

1/2” pedal threads have a diameter of 12.7mm

Once you know which size pedal thread you have, you can buy the appropriate pedals and install them yourself. Or, if you’re not confident in your ability to do that, you can take them to a bike shop and have a professional do it for you.

Do All Bike Pedals Have The Same Thread Size?

No, all bike pedals do not have the same thread size.

No, all bike pedals do not have the same thread size. The thread size is the diameter of the threaded part of the pedal axle, and it is this measurement that determines what size pedal you need. The most common sizes are 9/16” and 1/2”, but there are also some pedals available in 3/8” and 11/16”.

If you are unsure of what size pedal you need, the best way to find out is to take the old pedal with you when you go to purchase a new one. That way you can ensure that you get the correct size. If you don’t have the old pedal, or if it is damaged, you can measure the thread size with a ruler or a caliper.

Once you have the new pedal, you will need to install it. This is a relatively easy process, but you will need a few tools. First, you will need a pedal wrench or a 15mm wrench. Next, you will need to grease the threads on the pedal axle. This will help to prevent the pedal from becoming seized on the axle.

Finally, you will need to thread the pedal onto the axle. Start by threading it on by hand, and then use the wrench to tighten it. Be sure not to over-tighten the pedal, as this can damage the threads.

Do all bike pedals have the same thread size? No, all bike pedals do not have the same thread size. The thread size is the diameter of the threaded part of the pedal axle, and it is this measurement that determines what size pedal you need. The most common sizes are 9/16” and 1/2”, but there are also some pedals available in 3/8” and 11/16”.

If you are unsure of what size pedal you need, the best way to find out is to take the old pedal with you when you go to purchase a new one. That way you can ensure that you get the correct size. If you don’t have the old pedal, or if it is damaged, you can measure the thread size with a ruler or a caliper.

Once you have the new pedal, you will need to install it. This is a relatively easy process, but you will need a few tools. First, you will need a pedal wrench or a 15mm wrench. Next, you will need to grease the threads on the pedal axle. This will help to prevent the pedal from becoming seized on the axle.

Finally, you will need to thread the pedal onto the axle. Start by threading it on by hand, and then use the wrench to tighten it. Be sure not to over-tighten the pedal, as this can damage the threads.

Are All Bike Pedal Threads Compatible With Each Other?

No, bike pedal threads are not all compatible with each other.

Most bike pedal threads are compatible with each other. However, there are a few exceptions. For example, some BMX pedals have 14mm threads while most other pedals have 9/16″ threads. So, if you’re mixing and matching pedals, be sure to check the thread size before you buy.

In general, pedal thread compatibility is not something you need to worry about too much. Unless you’re a professional rider or you’re really into bikes, you’re probably not going to have more than one set of pedals anyway. And, even if you do have multiple sets of pedals, it’s not a big deal to carry around a few different sizes of pedals.

However, if you are a professional rider or you’re into bikes, then you might want to consider investing in a pedal wrench. This is a tool that allows you to change pedals quickly and easily, without having to worry about compatibility issues.

What Is The Standard Thread Size For Bike Pedals?

The standard thread size for bike pedals is 9/16-20.

Most bike pedals have a standard thread size of 9/16”. This is the size that will fit most crank arms and pedals on the market. However, there are some pedals that have a smaller thread size of 1/2”.

These pedals are usually designed for children’s bikes or some BMX bikes. If you are unsure of the thread size of your bike pedals, it is best to measure them before you purchase new pedals.

For example, if you are looking to buy new pedals for your child’s bike, you would need to measure the pedals to see if they have a standard 9/16” thread size or a smaller 1/2” thread size. You can measure the thread size by using a metric ruler or a caliper. Once you have determined the thread size, you can then purchase the correct size pedals for your child’s bike.

Are All Bike Pedals Compatible With All Crank Arms?

No, all bike pedals are not compatible with all crank arms.

Not all bike pedals are compatible with all crank arms. The reason for this is that bike pedals come in two different spindle sizes, 9/16″ and 1/2″. Most crank arms are made for the 9/16″ spindle size, but some crank arms, usually lower-end ones, are made for the 1/2″ spindle size.

This can be a problem when you’re trying to replace your bike pedals because you need to make sure that the new pedals you’re getting will fit onto your crank arms.

If you have crank arms that are made for the 1/2″ spindle size, then you’ll need to get bike pedals that are also made for the 1/2″ spindle size. You can usually tell what size spindle a bike pedal has by looking at the bottom of the pedal. It should say either 9/16″ or 1/2″. If it doesn’t say anything, then it’s probably a 9/16″ pedal.

If you’re not sure what size spindle your crank arms are, then you can measure them with a ruler. Just measure the diameter of the hole in the middle of the crank arm. If it’s about 12.7mm, then it’s a 1/2″ spindle. If it’s about 14.2mm, then it’s a 9/16″ spindle.

So, to answer the question, not all bike pedals are compatible with all crank arms. You need to make sure that you get pedals that have the same size spindle as your crank arms.

FAQ

Conclusion

There is no definitive answer to this question as there are many different types and sizes of bike pedals available on the market. However, it is safe to say that most bike pedals will have threads of a similar size, making them compatible with a variety of bikes.

Hopefully, you are clear now about bike pedal threads. If you still have any questions, feel free to comment below.