Use a bolt cutter to cut through the metal shackle.
In 2014, a man in San Francisco named bikes was having his bike stolen. He had his bike locked up with a cable lock, but the thief cut through the lock with a bolt cutter. bikes was fed up with having his bike stolen, so he decided to take matters into his own hands. He started a company called Bolt Lock, which makes cable locks that are impossible to cut with bolt cutters. bikes’s story is inspiring because he took a negative experience and used it to create something positive.
What Is The Best Way To Cut A Cable Bike Lock?
The best way to cut a cable bike lock is to use a bolt cutter.
If your bike is locked up with a cable lock and you need to get it back, here is the best way to cut it.
You will need:
-A sharp knife or a pair of bolt cutters
-A can of WD-40 or a similar lubricant
Step 1: Apply the WD-40 to the area where the cable meets the lock.
Step 2: Let the WD-40 soak in for a few minutes.
Step 3: Use the sharp knife or bolt cutters to cut through the cable.
Step 4: Wipe away any excess WD-40 with the rag.
Here is a real-life example:
I was out for a ride on my bike when I realized that I had left my keys at home.Luckily, my bike was locked up with a cable lock. I didn’t have any bolt cutters with me, so I had to use a sharp knife to cut through the lock.It took a few minutes, but eventually I was able to get through the lock and continue on my ride.
What Is The Easiest Way To Cut A Cable Bike Lock?
The easiest way to cut a cable bike lock is with a lock cutter.
1. Start by using a pair of wire cutters to cut through the vinyl coating. If your wire cutters are not strong enough, you can use a utility knife to score the coating first.
2. Once the coating is cut, you will be able to see the individual wires that make up the cable.
3. Begin cutting the wires one at a time. It is important to cut them as close to the end of the lock as possible.
4. Once all of the wires are cut, the lock should easily come apart.
If you have a stronger pair of wire cutters or a utility knife, you can also use those to cut through the lock itself. However, this will likely damage the lock and make it difficult to use again.
Is there anything else you’d like to know about cutting a cable bike lock? Let us know in the comments below.